JVC Camcorder GC FM1AA User Manual

LYT2154-002B  
EN  
HD MEMORY CAMERA  
U/E/AA  
GC-FM1  
Detailed User Guide  
ENGLISH  
 
Safety Precautions for the Camcorder  
To reduce the risk of fire, electrical shock, and injury to  
person, carefully follow these instructions.  
If this symbol is shown, it is only valid in  
the European Union.  
Do not expose this product to liquid, rain, moisture, or  
eDxotrneomteditseamsspeemrabtluerethsi.s unit.  
Do not insert foreign objects into the this unit - this  
Dear Customer,  
[European Union]  
may cause damage to internal components or cause  
This apparatus is in conformance with the valid  
iInt jisurryectoomyomue. nded to charge the battery connecting to  
PDCownoitthcthhaergUeSBthcisabplreo.duct if damaged, or has been  
Dimomneortssetdorine tlihqiusiudns.it in extreme cold or high  
European directives and standards regarding  
electromagnetic compatibility and electrical safety.  
European representative of Victor Company of Japan,  
Limited is:  
JVC Technical Services Europe GmbH  
Postfach 10 05 04  
tIfetmhepeLrCaDtubrereaarkesa,sd. o not touch the glass or liquid.  
Do not attempt to remove or replace the battery.  
61145 Friedberg  
Germany  
DDoo nnoottaptutenmctputretoodriisnacsisneemrabtlee tohrerebpaatitretrhye. camcorder.  
Do not dispose of this unit improperly. Check with local  
SOME DO’S AND DON’TS ON THE SAFE USE OF  
EQUIPMENT  
This equipment has been designed and manufactured  
to meet international safety standards but, like any  
electrical equipment, care must be taken if you are to  
obtain the best results and safety is to be assured.  
DO read the operating instructions before you attempt to use  
the equipment.  
DO ensure that all electrical connections (including the mains  
plug, extension leads and interconnections between pieces  
of equipment) are properly made and in accordance with  
the manufacturer’s instructions. Switch off and withdraw the  
mains plug when making or changing connections.  
DO consult your dealer if you are ever in doubt about the  
installation, operation or safety of your equipment.  
DO be careful with glass panels or doors on equipment.  
DON’T continue to operate the equipment if you are in any  
doubt about it working normally, or if it is damaged in any  
way — switch off, withdraw the mains plug and consult your  
dealer.  
cDoisdpeossfeoropf broaptteerrdieisspaoccsaolrdreinggultaotilooncsa.l and national  
rNeegvuelratailolonws. children to play with this unit small parts  
Ombasyebrveeaccahuotikoinngwhhaeznaruds.ing this unit strap to prevent  
sWtrhaennguulsaintigonth. e camcorder with a tripod, attach the  
camcorder to the tripod securely.  
Product Care  
Operating and storage temperatures 5 °C to +40 °C  
Do not drop this unit or subject it to excessive shock or  
vDiobrnaotitouns.e liquid or aerosol cleaners, as they may  
dKEaEmPaTgHeISthIeNSuTnRitUoCrTtIhOeNSnFisOhRoFfUthTeUpRrEoRdEuFcEtR. ENCE.  
CAUTION:  
Dispose of used batteries according to the instructions.  
Risk of explosion if battery is replaced by an incorrect  
type.  
DON’T remove any fixed cover as this may expose dangerous  
voltages.  
DON’T leave equipment switched on when it is unattended  
unless it is specifically stated that it is designed for  
unattended operation or has a standby mode. Switch off  
using the switch on the equipment and make sure that your  
family knows how to do this. Special arrangements may need  
to be made for infirm or handicapped people.  
ATTENTION:  
On placing the unit: Some TVs or other appliances  
generate strong magnetic fields. Do not place such  
appliances on top of the unit as it may cause picture  
disturbance.  
DON’T use equipment such as personal stereos or radios so  
that you are distracted from the requirements of road safety.  
It is illegal to watch television whilst driving.  
DON’T listen to headphones at high volume, as such use can  
permanently damage your hearing.  
DON’T obstruct the ventilation of the equipment, for example  
with curtains or soft furnishings. Overheating will cause  
damage and shorten the life of the equipment.  
DON’T use makeshift stands and NEVER fix legs with  
wood screws — to ensure complete safety always fit the  
manufacturer’s approved stand or legs with the fixings  
provided according to the instructions.  
Remember that this camcorder is intended for  
private consumer use only.  
Any commercial use without proper permission is prohibited.  
(Even if you record an event such as a show, performance  
or exhibition for personal enjoyment, it is strongly  
recommended that you obtain permission beforehand.)  
Trademarks  
HDMI is a trademark of HDMI  
LWicinednosiwngs®, LisLCei.ther registered trademark or  
trademark of Microsoft Corporation in the United  
SMtaacteinstaonsdh/iosraortehgeirstceoruednttrriaeds.emark of Apple Inc.  
DON’T allow electrical equipment to be exposed to rain or  
moisture.  
iPod, iTunes are trademarks of Apple Inc., registered  
ABOVE ALL  
iYnotuhTeubUe.Sa. nanddthoethYeorucTouubnetlroiegso. are trademarks  
NEVER let anyone especially children push anything  
into holes, slots or any other opening in the case — this  
aOntdhe/orrprreogdiustcetreanddtrcaodmempaanrkysnoafmYoeusTinucbleudLeLCd.in  
this instruction manual are trademarks and/or  
registered trademarks of their respective holders.  
cNoEuVlEdRregsuueltssinoar tfaaktaelcehleacntcreicsawl sihthocekle;ctrical equipment  
of any kind — it is better to be safe than sorry!  
3
 
Table of Contents  
Names of Components . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Attaching the Hand Strap. . . . . . . . . . . . . . . . . . . . . . . . . 6  
Indications on LCD monitor. . . . . . . . . . . . . . . . . . . . . . . 6  
Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Turning the Power On and Off . . . . . . . . . . . . . . . . . . . 10  
Inserting an SD Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Necessary Settings before Use . . . . . . . . . . . . . . . . . . . 11  
Setting Date and Time  
Setting the Video Output  
Viewing the firmware version of the unit  
Formatting an SD Card  
! Recording/Playback . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Video Recording  
Video Playback  
# Recording/Playback . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Still Image Recording  
Still Image Playback  
Deleting Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Viewing Files on TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Saving Files on a Computer . . . . . . . . . . . . . . . . . . . . . . 18  
System Requirements (Windows) . . . . . . . . . . . . . . . . 19  
Installing the Supplied Software . . . . . . . . . . . . . . . . . 20  
Exporting to iTunes® . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Uploading to YouTubeTM . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Warning Indications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Customer Support Information . . . . . . . . . . . . . . . . . . 26  
4
 
Names of Components  
LCD Monitor  
Focus Switching Lever  
Normal Recording [M]  
Macro Recording [  
]
Charge Lamp  
Status (Warning) Lamp  
Power Button [<]  
Power Lamp  
Recording Select Button  
Video [!]  
Still Image [#]  
Select Button [%]  
Recording/Playback  
Index Button [7]  
Delete Button [$]  
Reset Hole  
Hand Strap  
Attachment Area  
Recording Start/Stop Button  
Shutter Button  
Set Button  
¡ , ¢ , £ , ¤ Buttons  
Zoom Buttons  
Volume Buttons  
AV Connector  
Lens  
HDMI Connector  
USB Connector  
Microphone  
Speaker  
SD Slot Cover  
Tripod Mounting  
Socket  
5
 
Accessories  
USB Cable  
(WUU102SCP001)  
AV Cable  
(WPU122SCP001)  
Hand Strap  
Attaching the Hand Strap  
To guard against dropping the camcorder, we recommend attaching the  
hand strap.  
NOTE  
When carrying the camcorder, please be careful  
not to drop it. Dropping it may cause injury or a  
malfunction of your camcorder.  
When a child uses the camcorder, there must be  
parental guidance.  
Indications on LCD monitor  
8 Index  
! Videos / # Still Images  
Mode Indicator Folder Number_File Number  
Current Page/  
Total Number of Pages  
8 To delete/redisplay  
characters and symbols  
on the LCD monitor  
Press the 7 button for more  
than 2 seconds.  
6
 
Indications on LCD monitor (Continued)  
8 During Recording  
! Video  
Mode Indicator  
REC  
Remaining Time  
00h59m  
01:11  
Video Quality  
Counter  
1080p  
1080p/720p/VGA/  
QVGA  
Macro Recording  
W
T
Battery Indicator  
Display changes depending on  
the remaining battery level  
Zoom Bar  
W: Wide side, T: Tele side  
# Still image  
Mode Indicator  
Remaining Number of Shots  
3095  
Image Size  
8M/5M/2M/VGA  
M
8
Macro Recording  
W
T
Zoom Bar  
W: Wide side, T: Tele side  
7
 
Indications on LCD monitor (Continued)  
8 During Playback  
! Video  
Folder Number_File Number  
Recording Time  
Playback Time  
(minutes : seconds)  
_
01:48  
00:20  
103 0050  
Video Quality  
1080p/720p/VGA/  
QVGA  
1080p  
Playback Mode  
F : Playback  
N : Reverse search  
O : Forward search  
Q : Pause  
Volume Indicator  
# Still image  
Folder Number_File Number  
_
103 0050  
Image Size  
8M/5M/2M/VGA  
M
8
8
 
Charging  
Charge the battery connecting to the computer with the USB cable.  
Charge Lamp  
< Button  
Power Lamp  
USB Connector  
To Computer  
USB Cable  
Press the button to turn off the camcorder.  
The power lamp goes out.  
<
1
2
Connect the camcorder to a computer.  
Camcorder’s LCD monitor will turn off when the USB cable is connected.  
This occurs during battery charging or when connected to a PC.  
turns on: Charging  
Charge lamp  
goes out: Charging finished  
Charging time  
approx. 180 minutes  
When the charging is finished, disconnect the camcorder from the computer.  
NOTE  
Charging is not possible while the camcorder is turned on.  
Make sure that the computer is turned on during charging.  
The camcorder is not charged when it is shipped. Charge the camcorder before using it for  
the first time.  
If there is a trouble in charging, the charge lamp/warning lamp blinks in green. Connect the  
camcorder to the computer again.  
8 Battery Indicator  
Fully charged  
Medium  
Very low  
Recharge the battery at an early opportunity.  
Empty  
The camcorder will turn off. Recharge the battery immediately.  
Blinking  
9
 
Turning the Power On and Off  
Press the button for more than 1 second.  
The power lamp turns on.  
<
1
2
To turn off the power, press the button again.  
<
The power lamp goes off.  
NOTE  
To conserve power, the camcorder turns off automatically if there is no operation for  
3 minutes.  
If the only operation is turning on the power, the camcorder enters the video recording  
ready status.  
When you first turn on the power after purchasing the camcorder, the [Time setup] screen  
appears. Set the date and time before using the camcorder. (Z p. 11)  
Inserting an SD Card  
Operation-confirmed SD cards  
Operations are confirmed on the following SD cards. Panasonic, TOSHIBA, SanDisk, ATP.  
Video recording: Class 4 or higher compatible SDHC card (4 GB to 32 GB)  
Still image recording: SD card (256 MB to 2 GB) or SDHC card (4 GB to 32 GB)  
* If other media are used, they may fail to record data correctly, or they may lose data that had  
already been recorded.  
Preparation: Turn off the camcorder.  
Unlock the SD card slot and open the cover.  
1
Insert an SD card.  
2
Return the cover of the SD card slot and  
lock it.  
3
NOTE  
When the SD card is removed or inserted, the power turns off.  
Turn off the power before inserting the card.  
When an SD card is inserted, the SD card is prioritized as the destination for data saving.  
10  
 
Necessary Settings before Use  
Setting Date and Time  
Preparation:  
Turn on the power and select the recording mode.  
While pressing the button, press the button.  
$
7
1
2
Select [Time setup], and then press the  
set button.  
Set the date and time by selecting items  
3
4
with  
,
and setting values with , .  
£ ¤  
¡ ¢  
After completing the setting, press the  
set button.  
8 To quit the screen  
Select [Exit], and then press the set button.  
NOTE  
[Hour] is displayed in 24 hour format only.  
11  
 
Necessary Settings before Use (Continued)  
Setting the Video Output  
Preparation:  
Turn on the power and select the recording mode.  
While pressing the button, press the button.  
$
7
1
2
Press the  
,
buttons to select [Video  
¡ ¢  
out], and then press the set button.  
Press the  
,
buttons to select [NTSC]  
¡ ¢  
3
or [PAL], and then press the set button.  
8 To quit the screen  
Select [Exit], and then press the set button.  
NOTE  
Set the camcorder’s video output to the system that is appropriate for your TV.  
NTSC: Japan, USA, South Korea, etc.  
PAL: Europe, China, etc.  
Viewing the firmware version of the unit  
You can confirm the firmware version of the unit.  
1) While pressing the $ button, press the  
7 button.  
2) Press the ¡ , ¢ buttons to select  
[Firmware version], and then press the  
set button.  
8 To quit the screen  
Select [Exit], and then press the set button.  
12  
 
Formatting an SD Card  
Preparation:  
Insert an SD card.  
Turn on the power and select the recording mode.  
While pressing the button, press the button.  
$
7
1
2
Press the  
,
buttons to select  
¡ ¢  
[Format], and then press the set button.  
Press the , buttons to select [Yes],  
and then press the set button.  
£ ¤  
3
8 To quit the screen  
Select [Exit], and then press the set button.  
NOTE  
Formatting erases all data (videos and still images) on the SD card.  
13  
 
! Recording/Playback  
Video Recording  
During recording, the screen display  
changes to red  
Press the button to turn on the  
power.  
<
1
The camcorder enters the video recording  
ready status.  
Press the set button.  
The recording starts.  
2
8 To stop recording  
Press the set button again.  
8 To change the quality  
Press the £ button twice. Each time you press the £ button twice, you can change  
the quality.  
1080p(default) & 720p & VGA & QVGA  
8 To zoom  
Press the ¡ , ¢ buttons.  
NOTE  
Zoom is performed digitally, therefore image quality degrades when zooming.  
Video Playback  
Press the button to select the playback mode.  
%
1
2
Press the  
video.  
,
,
, buttons to select a  
¡ꢀ¢ £ ¤  
Press the set button to start playback.  
Press it again to stop the playback.  
3
8 To return to the index  
Press the 7 button.  
8 To change the volume  
Press the ¡ , ¢ buttons during  
playback.  
8 To perform forward search or  
reverse search  
Press and hold the £ , ¤ buttons  
during playback. When the button is  
released, normal playback resumes.  
14  
 
# Recording/Playback  
Still Image Recording  
Press the button to turn on the power.  
<
1
2
3
Press the  
/
button to select  
.
#
! #  
Press the set button.  
The recorded still image is saved.  
8 To change the image size  
Press the £ button twice. Each time you press the £ button twice, you can change  
the image size.  
8M (default) & 5M & 2M & VGA  
8 To zoom  
Press the ¡, ¢ buttons.  
NOTE  
Zoom is performed digitally, therefore image quality degrades when zooming.  
Still Image Playback  
Press the button to select the playback mode.  
%
1
2
3
Press the  
/
button to select  
.
#
! #  
Press the  
still image.  
,
,
, buttons to select a  
¡ꢀ¢ £ ¤  
Press the set button.  
4
8 To return to the index  
Press the 7 button.  
15  
 
Deleting Files  
Preparation:  
Select the playback mode.  
Press the button.  
7
1
Press the  
,
,
, buttons to select a file.  
¡ꢀ¢ £ ¤  
2
3
4
Press the button.  
$
Press the , buttons and press the set  
£ ¤  
button to select [Yes].  
NOTE  
You can also delete by pressing the $ button while a video is playing back or a still image is  
Ydoisuplcaaynendo. t delete all the files at once.  
16  
 
Viewing Files on TV  
Preparation:  
Turn on the TV.  
Turn on the camcorder and select the playback mode.  
8 To connect using the AV connector  
AV Connector  
TV  
< button  
AV cable  
8 To connect using the HDMI mini connector (optional)  
HDMI Connector  
TV  
< button  
HDMI Cable (optional)  
(Mini to full-sized HDMI cable)  
Connect the camcorder to a TV.  
After being connected, the camcorder switches automatically to  
monitor display.  
1
Switch to the TVs external input connector.  
2
3
4
Press the button.  
7
Start the playback.  
Video ( p. 14)  
Z
Still image ( p. 15)  
Z
NOTE  
When an AV cable and an HDMI cable are connected, output to the HDMI cable is prioritized.  
Also refer to instruction manual of the TV.  
Set the camcorder’s video output to the playback system that is appropriate for your TV.  
(Z p. 12)  
We recommend using the Category 2 HDMI cable (High Speed cable).  
17  
 
Saving Files on a Computer  
Preparation:  
Turn on the computer.  
Turn on the camcorder.  
You can save recorded videos and still images on a computer.  
To Computer  
USB  
Connector  
USB Cable  
Connect the camcorder to a computer.  
Camcorder’s LCD monitor will turn off when the USB cable is connected.  
This occurs during battery charging or when connected to a PC.  
1
8 Windows: Double-click [FMCAM_SD]/[FMCAM_INT] in [My  
Computer].  
2
3
8 Macintosh: Double-click [NO_NAME] on the desktop.  
Copy the video or still image files from theDCIM” folder.  
[DCIM]  
[100JVCSO]  
[101JVCSO]  
[102JVCSO]  
PIC_XXXX.MOV  
PIC_XXXX.MOV  
PIC_XXXX.JPG  
PIC_XXXX.JPG  
[FMCAM_SD]  
SD Card  
Videos  
Still Images  
[FMCAM_INT]  
Internal Memory  
8 To disconnect the camcorder from a computer (Windows)  
1) Click the  
icon in the task tray on the computer screen.  
2) The [Safely Remove Hardware] window appears.  
3) Select [USB Mass Storage Device] and then click [Stop].  
8 To disconnect the camcorder from a computer (Macintosh)  
Move [NO_NAME] from the desktop to [Trash], and then disconnect the USB  
cable.  
18  
 
System Requirements (Windows)  
The system configuration described below is required in order to use this  
software.  
8 OS  
Microsoft Windows XP Service Pack 3  
- Home Edition/-Professional (pre-installed)  
Microsoft Windows Vista Service Pack 2 (32 bit)  
- Home Basic/-Home Premium (pre-installed)  
8 CPU  
Intel Core Duo 1.66 GHz or higher  
(Intel Core 2 Duo 2.13 GHz or higher recommended)  
8 Memory  
8 Hard disk  
8 Display  
Windows XP: 1 GB or more  
Windows Vista: 2 GB or more  
250 MB or more disk space is required for software  
installation.  
1024 x 768 pixels, 16 bit (High-color) or more.  
(1280 x 1024 pixels, 32 bit or more,  
Intel G965 (onboard VGA) or higher recommended)  
8 Others  
Standard USB 2.0 port  
19  
 
Installing the Supplied Software  
Preparation:  
Turn on the camcorder.  
Connect the camcorder to a computer.  
* The screenshots in the steps below are for Windows XP.  
[FMCAM_FRM] window appears.  
1
Select [MediaBrowser LE Install and  
User Guide] and click [OK].  
2
Select [MediaBrowser LE].  
3
In the [Choose Setup Language], select  
a language and click [Next].  
4
Follow the on-screen instructions.  
Click [Finish].  
An icon appears on the desktop.  
5
NOTE  
For details about operations in MediaBrowser LE, see its Help.  
20  
 
Exporting to iTunes®  
You can easily transfer videos recorded to iTunes® and play back them on  
iPod®, using the supplied MediaBrowser LE software.  
For details about iTunes® and iPod®, see the website.  
Preparation:  
Install the supplied MediaBrowser LE software to the computer. (Z p. 20)  
After the software is installed, disconnect the camcorder from the  
computer.  
If the software is already installed, turn on the camcorder.  
Connect the camcorder to a computer.  
MediaBrowser LE starts.  
1
Edit the file using MediaBrowser LE if necessary.  
2
3
Transfer files using the [Export] function of MediaBrowser LE.  
NOTE  
For details about operations in MediaBrowser LE, see its Help.  
21  
 
Uploading to YouTubeTM  
You can easily upload videos to YouTubeTM, the video sharing website, using  
the supplied MediaBrowser LE software.  
For details about YouTube™, see the website.  
Preparation:  
Install the supplied MediaBrowser LE software to the computer. (Z p. 20)  
Turn on the camcorder.  
Connect the camcorder to a computer.  
MediaBrowser LE starts.  
1
Click the [Device] icon of MediaBrowser LE.  
2
: Internal memory  
: SD card  
Click the date containing video files,  
then drag and drop the selected files to  
3
[Show all] in the [Library].  
The files are imported into MediaBrowser LE.  
Disconnect the camcorder from the  
computer.  
4
Upload files to YouTubeTM using the  
[YouTube] (uploading) function of  
MediaBrowser LE.  
5
NOTE  
When you operate video files using MediaBrowser LE, copy them to the computer from the  
camcorder. If you operate the video files in the camcorder directly, they may be damaged  
due to battery exhaustion.  
For details about operations in MediaBrowser LE, see its Help.  
22  
 
Warning Indications  
Before requesting service, consult the following chart. If the solutions indicated in the chart do  
not solve the problem, consult your nearest JVC dealer or JVC service center for instructions.  
Refer also to the FAQ section on JVC’s website  
The following phenomena are not malfunctions.  
LCD monitor momentarily become red or black when sunlight is recorded.  
Black spots, or red, green, or blue spots appear on the LCD monitor.  
(The LCD monitor contains 99.99% effective pixels, but 0.01% or fewer pixels may be  
ineffective.)  
The camera is a microcomputer-controlled device. Electrostatic discharge, external noise and  
interference (from a TV, a radio, etc.) might prevent it from functioning properly. In such a  
case, reset the camera.  
8 To Reset the Camcorder  
If the camcorder malfunctions, push into the reset hole with a pointed object such as a  
wire to initialize the camcorder. (Z p. 5)  
Indication  
Action  
Z
Memory card is full  
10, 16,  
18  
DReepleltaecelethseorSmDocvaerdthweimthtoa anecwomopnuet.er or other storage.  
Internal memory is full  
Memory card is protected  
Unlock the write-protect switch of the SD card.  
Memory card is low speed  
Replace the SD card with specifications one that is  
10  
10, 13  
compatible with high-speed transfer.  
Memory card cannot be  
used  
Format the SD card.  
Replace the SD card with a new one.  
No Files  
Remove the SD card and check whether the data on the SD  
card was recorded using this camcorder.  
Invalid  
This file is protected  
Deletion cannot be performed on the camcorder. Cancel the  
9
protection on a computer and then delete the file.  
Insufficient battery. Please  
charge it.  
Recharge the battery.  
MTuarkneosureththeactaymoucuosreddetrhaencdortrhecetnptruocrnedounreaagnadintr.y again.  
If the actions above do not resolve the issue, replace the SD  
card with a new one.  
Format failed.  
10  
13  
Recovery failed.  
Delete failed.  
Move files to a computer, and then format the SD card.  
10, 13,  
18  
Replace the SD card with a new one.  
Make sure that you used the correct procedure and try  
13, 16  
aIfgtahien.actions above do not resolve the issue, replace the SD  
card with a new one.  
The file number reaches a  
maximum. Please delete  
all files in the memory card  
or the internal memory for  
recording.  
Delete all files.  
10, 16  
Replace the SD card with a new one.  
23  
 
Specifications  
8 General  
8 Video  
Power consumption  
Recording/Playback format  
Video: MPEG-4 AVC/H.264  
Audio: AAC  
1.9 W  
Dimensions (W × H × D)  
53.0 mm × 97.0 mm × 17.0 mm  
(2-1/8" × 3-7/8" × 11/16")  
Weight  
Signal format  
Digital high definition format  
1080/30p  
Video quality  
1080p (16 : 9) 1440 × 1080p  
720p (16 : 9) 1280 × 720p  
95 g (0.21 lbs)  
100 g (0.23 lbs) (Including SD card)  
Operating environment  
Operating temperature:  
5 °C to 40 °C (41 °F to 104 °F)  
Storage temperature:  
–20 °C to 60 °C (–4 °F to 140 °F)  
Operating humidity:  
35 % to 85 %  
VGA (4 : 3)  
QVGA (4 : 3) 320 × 240p  
640 × 480p  
8 Still image  
Recording format  
JPEG  
Image size (4 : 3)  
8 Camera/LCD monitor  
Pickup  
8M  
5M  
2M  
VGA  
3264 × 2448  
2592 × 1944  
1600 × 1200  
640 × 480  
1/3.2" (8,170,000 pixels) progressive CMOS  
Lens  
F 2.8, f = 3.9 mm  
8 Media  
35 mm equivalent  
Video: 1080p  
720p  
55 mm  
42 mm  
30 mm  
Internal  
Recordable capacity: approx. 34.5 MB  
VGA  
Commercially available SD cards  
QVGA 30 mm  
Still image: 30 mm  
LCD monitor  
2.0-inch LCD  
Zoom  
Digital ×4  
8 Connectors  
AV connector  
ø 3.5 mm  
Video output: 1.0 V (p-p), 75 W  
Audio output: 300 mV (rms), 1 kW  
USB connector  
Mini USB type B  
(USB 2.0 High Speed compliant)  
HDMI connector  
HDMI Mini Connector (V1.3)  
Output: 1080i  
24  
 
8 Approximate recordable time (for video)  
Recording  
medium  
SDHC Card  
Internal  
memory  
Quality  
4 GB  
8 GB  
16 GB  
32 GB  
1080p  
24 s  
24 s  
41 m  
41 m  
1 h 24 m  
1 h 24 m  
4 h 14 m  
21 h 17 m  
2 h 47 m  
2 h 47 m  
8 h 23 m  
42 h 8 m  
5 h 42 m  
5 h 42 m  
17 h 07 m  
85 h 57 m  
720p  
VGA  
1 m 05 s  
5 m 42 s  
2 h 05 m  
10 h 27 m  
QVGA  
h: hour/ m: minute/ s: second  
If you record 29 minutes continuously, it will stop recording automatically.  
When the battery life is too low even if it is in full charge, the battery comes to the end of its  
life.  
8 Approximate number of images (for still image)  
Recording  
medium  
SD Card  
2 GB  
SDHC Card  
Internal  
memory  
4 GB  
8 GB  
16 GB  
32 GB  
Quality  
3264 × 2448  
10  
20  
870  
1710  
2710  
7010  
9999  
3480  
5510  
9999  
9999  
6900  
9999  
9999  
9999  
9999  
9999  
9999  
9999  
2592 × 1944  
1600 × 1200  
640 × 480  
1370  
3560  
9999  
60  
360  
The recordable time and the number of still images are approximate and may differ  
depending on the recording environment, the SD card, or the remaining battery power.  
Design and specifications subject to change without notice.  
25  
 
Customer Support Information  
Use of this software is authorized according to the terms of the software license.  
JVC  
When contacting the nearest JVC office or agency in your country (refer to the JVC Worldwide  
software, please have the following information ready.  
Product Name, Model, Problem, Error Message  
PC (Manufacturer, Model (Desktop/Laptop), CPU, OS, Memory (MB/GB), Available Hard Disk  
Space (GB))  
Please note that it may take some time to respond to your questions, depending on their  
subject matter.  
JVC cannot answer questions regarding basic operation of your PC, or questions regarding  
specifications or performance of the OS, other applications or drivers.  
Pixela  
Region  
Language  
Phone #  
USA and Canada  
English  
+1-800-458-4029 (toll-free)  
Europe (UK, Germany,  
France, and Spain)  
English/German/French/  
Spanish  
+800-1532-4865 (toll-free)  
+44-1489-564-764  
Other Countries in  
Europe  
English/German/French/  
Spanish/Italian/Dutch  
Asia (Philippines)  
China  
English  
Chinese  
+63-2-438-0090  
10800-163-0014 (toll-free)  
Please check our website for latest information and downloading.  
26  
 
© 2009 Victor Company of Japan, Limited  
 
US/EU/AA 0809FOH-AL-OT1  

Initial Technology DVD VCR Combo Recorder User Manual
Insignia Digital Camera NS DSC1110A User Manual
Intel Computer Hardware BLKDZ75ML45K User Manual
Jacuzzi Hot Tub EM90 User Manual
John Lewis Range JLBIGH702 User Manual
JVC MiniDisc Player XM PX5SL User Manual
Kenwood Blender HB790 series User Manual
Kenwood MP3 Docking Station KPA H2EH User Manual
KitchenAid Oven KESS907SBL04 User Manual
Klipsch Speaker AWR 650 SM User Manual